Department of Agriculture, Water and the Environment, 2016
If you have difficulty accessing this file, visit web accessibility for assistance.
- New vehicles held at the wharf for inspection by the Department of Agriculture, Water and the Environment biosecurity officers.
- Increased surveillance for all vehicles.
- Wharf congestion; vehicle vessels unable to unload.
- Wharf charges.
- Charges for 100 per cent inspection for the same make and model (for example, when seed contamination is found).
- Charges for decontamination and re-inspection.
- Delays in meeting vehicle delivery orders.
How to minimise biosecurity risks offshore
As an exporter you are responsible for making sure that all goods for export to Australia meet Australia’s import and biosecurity requirements, including being free of exotic insects and pests. Everyone in the supply and retail chain has a role in recognising and reporting any signs of pest activity in new vehicles. To avoid delays and additional costs to your business make sure you know what the import and biosecurity requirements are before you export your products.
- Be aware of the seed seasons in the country of export.
- Cover the new vehicles during transport from manufacturer to port.
- Work with wharf authorities to ensure port hygiene and remove vegetation that surrounds all wharf areas.
- Implement weed control measures such as mowing and slashing around all new vehicle standing areas.
- Before loading new vehicles onto the vessel, conduct a general walk-around inspection of all new vehicles. Look at all parts of the vehicles from different angles to ensure they are free of biosecurity risk material.
- Remove and replace contaminated or partly detached sticky wheel covers and other protective material, prior to loading.
- Consider setting up a biosecurity team that is responsible for all of the above activities.
- seeds – dormant or sprouted
- leaves, twigs, branches, sticks, straw, grass
- flowers and flower parts.
Vehicle surfaces are perfect locations for plant material to lodge. Plant material can carry exotic fungal pathogens or, in the case of seeds, be capable of germinating and introducing a pest plant species or a seed borne disease.
Examples of plant material found on new vehicles include:
Soil and soil materials
Soil materials pose a high biosecurity risk for Australia and include sand, gravel, stones, and rocks. These soil materials do not pose a biosecurity risk if they are clean and do not contain any organic matter or other biosecurity risk material.
Soil can be present as road splash; if the splash is 2 mm deep or less it is not a biosecurity risk. Soil as a contaminant on new vehicles will be present in larger quantities and can be found on surfaces such as floors, wheel arches and ledges.
Soil can carry fungal, viral and bacterial pathogens that are exotic to Australia.
Examples of soil found on new vehicles include:
(this level of soil is not acceptable)
Animal material poses a high biosecurity risk to Australia and means material from animal origin including:
- nests – birds, rodents
- faeces – birds, rodents
- live animals.
Vehicle surfaces are perfect locations for animal material to lodge. Animal material can carry viral or bacterial pathogens.
Examples of animal material found on new vehicles include:
Insects and snails
Insects and snails find their way onto new vehicles for a number of reasons including:
- food source
- surface to make a nest
- movement from one place to another.
Examples of insects and snails on new vehicles:
The two levels of contamination are:
- spot contamination
- widespread contamination.
Spot contamination means small amounts of contamination that can be easily and immediately removed.
Examples of spot contamination on new vehicles:
Widespread contamination means a larger amount of contamination that cannot be easily and immediately removed, or contamination that is found in multiple areas on the vehicle.
Examples of widespread contamination on new vehicles:
Likely contamination points
Some areas of the vehicles are more likely to contain contamination than other areas. The likely contamination points are:
- plastic protective covers
- radiator, grille and air vents
- wheel arches
- window ledges
- under the car
- engine cavity.
As you inspect the vehicle, concentrate on these likely contamination points. (Note: images are indicative only.)
Protective coatings (plastic sheeting and painted-on)
All protective coatings should be checked to see if airborne seeds or plant material have stuck to them. After wet weather these seeds can be hard to find as they are small and tend to disappear under water droplets.
The plastic sheets would usually have contamination stuck to the corners where the sheets have not adhered to the paintwork, where the sheets have come away from the paintwork, or where sheets overhang the side of the panel. The painted-on protective coatings can have airborne seeds stuck to part of the coating.
Radiator, grille and air vents
The fins on the radiator, the corners of the grill and the air vents at the base of the windscreen are also ideal locations for captured airborne seeds and plant material.
Wheel arches should be checked for soil that has clumped under the wheel arches or has splattered onto the paintwork. This site is favoured by moths to lay their eggs.
Wheel arches should be inspected for airborne seeds that could be caught on the sound proofing under the wheel arch or around any exposed grease on axles. Check the tops of mudguards and around the inside of the wheel arches—especially carpeted wheel arches—in case they have been contaminated.
The window ledges should be checked for any seed or other forms of contamination that has been caught in the rubber.
Under the car
Where possible, check the under surfaces of the vehicle while you are looking at the wheel arches.
The engine cavity, including the soundproofing under the bonnet, must be checked for any contamination.
Other contamination points
Other areas that may require inspection include:
- door seals and locks
- the interior of the vehicle itself.
These areas are less likely to be contaminated. However, if evidence suggests these areas may be contaminated, then they must be inspected.
Inspect the boot latch for anything that may be caught in it. Inspect the spare wheel and spare wheel well for contaminants that may have blown in and lodged there.
Inspect the boot lining, any exposed wiring, and any storage compartments.
Door seals and locks
Inspect rubber door seals, locks and the greasy internals for contaminants.
Inspect the floors, especially behind the front seats and around the pedals for soil.
Inspect the vents, at the sides of the vehicle and across the dashboard.
Inspect the console, ashtrays, glove box and any front and rear storage compartments.
Inspect the seats, front and rear, dashboard and instrument panel.
General inspection process
If contamination is found, it must be removed before the new vehicle is loaded onto the vessel.
Some vehicle cleaners have adopted the following treatments with success:
- Seed - hand picking the seed off with sticky tape or equivalent.
- Soil – pressure hose.
- Insects/snails – physical removal.
- Insect infestation – fumigation treatment.
Inspection process in Australia
When the vehicles arrive in Australia, the Department of Agriculture, Water and the Environment biosecurity officers will conduct surveillance inspections to ensure compliance with Australia’s import requirements.
If the shipment does not meet Australia’s requirements, the Department may:
- conduct further inspections
- take remedial action to address the biosecurity risk.